Detailed Product Description:

EFS-2500 is the most effective paint stripper we have tried yet.

This stripper will lift even the toughest powder coats, epoxies, and

aerospace-grade polyurethanes.

It is earth-friendly, eco-safe, non-toxic, non-flammable, non-hazardous,

and biodegradable.  And, unlike most industrial-grade strippers, EFS-2500

contains no methylene chloride (dichloromethane).

Applications:
The EFS-2500 formulation is compatible with the needs of the aerospace,

aviation, marine, automotive, military (army & navy), commercial,

and building restoration industries.  Some industry uses include paint

stripping for aircraft, helicopters, boats, ships, military vehicles, trains,

building graffiti, dip tanks, and more.

Applicable Substrates: 

Will safely and effectively lift the toughest coatings from all metals

including aluminum, cadmium, magnesium, steel, titanium, steel,

stainless, copper, and zinc.  Also works amazingly well on brick,

ceramic, concrete, fiberglass, masonry, plaster, stone, wood, furniture,

and gelcoats.  Formulation also prevents localized breakdown of

passivating oxide films.

How It Works:

Unlike traditional paint removers or strippers that seek to dissolve

the coating, EFS-2500 works by penetrating the microscopic pinholes

in the coating and then attacking the bond between the coating and the

substrate.  Thus, it works more like a paint lifter than a paint remover.

Specification Compliance and Endorsements:

EFS-2500 was tested by Boeing Aircraft Company in 2007 per D6-17487

“Evaluation of Aircraft Maintenance Materials.”

                Click here to download test results.

Environmental Impact:

Formulation contains no Methylene Chloride, no Formic Acid, nor

Carbonic Acid, and no NMP (n-methyl 2-pyrrolidone).  None of the

components in this formulation appear on the EPA list of 189 HAPS

(Hazardous Air Pollutants) or Toxic or Hazardous substances.

VOC & government compliant, and is a natural safe and green

alternative to conventional chemical paint removers .

Application Equipment:
Airless or air spray gun with a wide open nozzle, brush, or roller.

Application Procedure:
Stir to uniform consistency—no thinning is necessary.
Apply a very thick wet film to 30-40mil.

Depending on coating type, lift time can be from 1 to 12 hours.

Scrape the paint film off with plastic scraper or pressure wash then rinse.

Neutralize surfaces with soapy water.

Clean application equipment with water.
 
Safety Precautions:
May be harmful if swallowed.  May cause skin irritation.  Eye irritant.

Non-hazardous by inhalation.  To be used by professionally trained

personnel using proper safety equipment.  Use only with adequate ventilation.

Download, read, and understand precautions outlined in MSDS before using

this material.

Click here to download MSDS (Material Safety Data Sheet)

Size/Packaging: