Detailed Product Description:

This is a proprietary polyester resin-based bottom finish,

specifically formulated to minimize friction on the bottom

of aluminum or fiberglass air boats.

Its consistency is similar to the flow coat (clear gel coat) used

as a final finish on the inside of race boat hulls.   It includes

surface curing additives, gloss additives, and most importantly,

dry film lubricants that saturate the full thickness of the coating.

Appearance:

Mud Slide will produce a coating with a gun-metal gray color.

Background:

Unlike conventional boats where the challenge is to simply reduce

the frictional drag of water, air boats have the unique challenge of

needing to be able to glide smoothly over pond lilies and other

marine growth.  Over the years, enthusiasts have experimented with

a number of bottom treatments to reduce the risk of dynamic

fouling and to improve their speeds over these growths.

Application Notes:

The surface to be coated should be abraded, washed, rinsed,

and then wiped down with acetone.  See more complete instructions

by following link:

                Click here to download detailed preparation & application instructions

Mud Slide can be brushed on, rolled on, or sprayed on using a

standard HVLP gun with large orifice as used for gel coats.

Precautions:

Use with adequate ventilation.  May be harmful if swallowed. 

May cause skin irritation.  Eye irritant.  Download, read, and

understand precautions outlined in MSDS before using this material.

Click here to download MSDS (Material Safety Data Sheet)

Packaging:

Contents of one quart comes with separate bottle of catalyst and

a measuring cup to assure proper and consistent addition of catalyst.